Floyd Rose Nut Shelf Height ?

Stop your file before the slot's too deep! Cutting string slots is delicate: if you cut one slot a little too low, you've blown the nut and have to start

Floyd Rose Nut Shelf Height ? There is about 1mm at the nut between bottom of the low E string and the fret board The Murphy's nut slots are not as deep Much more of the

Stop your file before the slot's too deep! Cutting string slots is delicate: if you cut one slot a little too low, you've blown the nut and have to start

mecca slot it's not worth trying if you don't use actual nut files Yes it is possible to slot nuts with welding tip files and strings super glued to

it's not worth trying if you don't use actual nut files Yes it is possible to slot nuts with welding tip files and strings super glued to

nuts and bolts slot The trick is getting the nut slots to the proper depths Some simply sand the bottom on pre-slotted nuts ( I do this myself to get the nut to a

When installing new nuts, I measure with feeler gauges and a radius gauge under the file when slotting a nut but for your purposes you can do